Aluminum Alloy 3003 Data Sheet

See the full list of United Aluminum Alloys Here

Alloy Group: 3XXX

PRINCIPAL ALLOYING ELEMENT: Manganese

 

ALUMINUM ALLOY 3003 GENERAL DESCRIPTION:

3003 is a widely used medium strength aluminum alloy with manganese as its primary alloying element. It has good formability, and may be suitable for applications that require bending, spinning, drawing, stamping and roll forming.

TYPICAL CHEMISTRY LIMITS:

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others-Each

Others Total

Al Min

3003

0.6

0.7

0.50-0.20

1.0-1.5

0.05

0.15

Remainder

Composition according to Aluminum Association

TYPICAL MECHANICAL DATA:

The following typical properties are not guaranteed since in most cases they are average for various sizes and methods of manufacture and may not be exactly representative of any particular product or size. The data is intended for comparing alloys and tempers and should not be used for design purposes.
 

Source: Aluminum Standards & Data and United Aluminum data base

Alloy-Temper

Tensile Strength

(ksi)

Yield Strength

(ksi)

Elongation

(%)

3003-O

16

6

30

3003-H14

22

21

3

3003-H18

29

27

3

 

Coil of Aluminum Alloy 3003 on a pallet.

Although this data has been designed by United Aluminum or taken from sources United Aluminum believes to be reliable, this data needs to be thoroughly evaluated and tested by technically skilled personnel before any use is made thereof. United Aluminum assumes no responsibility or liability for any use of this data, or with respect to the infringement of any patent, and no warranties are give or implied by United Aluminum. This information is not to be copied used in evidence, released for publication or passed to a third party without written permission from United Aluminum.
 

© 2021 United Aluminum Corporation