Aluminum Alloy 3004 Data Sheet

Print Friendly, PDF & Email

See the full list of United Aluminum Alloys Here

Alloy Group: 3XXX

PRINCIPAL ALLOYING ELEMENT: Manganese and Magnesium

 

ALUMINUM ALLOY 3004 GENERAL DESCRIPTION:

What is Aluminum 3004?

Aluminum 3004 is a medium strength aluminum alloy with manganese and magnesium as its primary alloying elements. It has higher strength than 3003 alloy but lower ductility.

TYPICAL CHEMISTRY LIMITS for ALUMINUM 3004:

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others-Each

Others Total

Al Min

3004

0.30

0.7

0.25

1.0-1.5

0.8-1.3

0.25

0.25

0.05

0.15

Remainder

Composition according to Aluminum Association

TYPICAL MECHANICAL DATA for ALUMINUM 3004:

The following typical aluminum 3004 properties are not guaranteed since in most cases they are average for various sizes and methods of manufacture and may not be exactly representative of any particular product or size. The data is intended for comparing alloys and tempers and should not be used for design purposes.
 

Source: Aluminum Standards & Data and United Aluminum data base

Alloy-Temper

Tensile Strength

(ksi)

Yield Strength

(ksi)

Elongation

(%)

3004-O

26

10

19

3004-H34

39

29

5

3004-H38

41

36

4

 

Coil of Aluminum 3004 Alloy on a pallet.

Although this data has been designed by United Aluminum or taken from sources United Aluminum believes to be reliable, this data needs to be thoroughly evaluated and tested by technically skilled personnel before any use is made thereof. United Aluminum assumes no responsibility or liability for any use of this data, or with respect to the infringement of any patent, and no warranties are given or implied by United Aluminum. This information is not to be copied, used in evidence, released for publication or passed to a third party without written permission from United Aluminum.
Print Friendly, PDF & Email